eSun 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2 lbs.)

Di uno scrittore di uomini misteriosi

Descrizione

Buy eSun 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2 lbs.) at

As compared to PLA, PLA+ (PLA pro) is: - several times stronger than standard PLA (printouts are very hard to break!) - superb layer bonding - high rigidity - better glossiness - no cracking or brittle problems 1kg net (approximately 2.2 lbs.) PLA filament with clear spool esun PLA pro 3D printer filament vacuumed sealed with desiccant. Superb layer bonding. 1.75mm filament diameter (dimensional accuracy +/- 0.05mm) recommended extrusion/nozzle temperature 205 C - 225 C spool diameter: 8 - spool width: 2.50 - spool hub hole diameter: 2.05 - inner circle diameter: 3.5 extrusion temperature range: 205 to 225 Celsius PLA pro (pla+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. PLA+ has a low shrunk rate and sticks very well both to bed and layer to layer. PLA+ is a biological, extracted and purified from corn grain, eco- friendly, odorless, and harmless to human.

eSUN PLA Lite Filament 1.75mm, 3D Printer Filament Upgraded PLA Filament, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers,Red - Yahoo Shopping

DURAMIC 3D PLA Filament 1.75mm , 3D Printing Filament 1kg Spool(2.2lbs – Duramic 3D

【 Easy to Print】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no

eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers

eSun ePLA-ST Filament 1.75MM,Super Tough PLA 3D Printer Filament 1KG ( – wisepro3d

eSUN -Wholesale- PLA+ PLA Pro Plus Filament 1.75mm 10kg/22LB For 3D Printer

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.

eSUN 3D Printer PLA+ Filament 1.75mm 1KG/Roll - Peak Green

Cookiecad 1.75mm Mermaid (Rainbow Transition) PLA 3D Printer Filament - 1kg Spool (2.2 lbs) - Micro Center

eSUN 1.75mm Magenta PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Magenta

eSun ePLA-ST Filament 1.75MM,Super Tough PLA 3D Printer Filament 1KG ( – wisepro3d

【Higher Toughness & Impact Strength】Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It's also low warpage and shrinkage,

ELEGOO PLA Plus Filament 1.75mm Dark Blue 1KG, PLA+ Tougher and Stronger 3D Printer Filament Pro Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs)

eSUN 3D Printer Filament PLA+ 1.75mm 1kg (2.2 lbs) Spool, Blue

1KG net (apximately 2.2 lbs) Filament with Clear Spool eSUN ABS-PLUS 3D Printer Filament Vacuumed Sealed With Desiccant 1.75mm Filament Diameter

eSUN 1.75mm Black ABS+ 3D Printer Filament 1kg Spool (2.2lbs), Black

【Designed for High Speed Printer】Under same model and printing time, eSUN PLA HS can print 3-5 times faster at a speed of 250mm/s than ordinary PLA at

eSUN PLA HS High Speed PLA Filament 1.75mm, 3D Printer Filament Fast Print High Flow Speedy PLA, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS)

da per adulto (il prezzo varia in base alle dimensioni del gruppo)

eSun 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2 lbs.)

Suggerisci ricerche

Potrebbe piacerti anche